Divinol T 6 KA ISO 68
Art-Nr.: 90050- special lubricant for guide- and slide ways
Would you like to have further information? Registered customers additionally have access to downloads and datasheets. Please log in or register for our protected customer area.
Registration / Login
Product Details
| Colour / DIN ISO 2049 | lighter 4.5 |
| Density/15°C / DIN EN ISO 12185 | 890 kg/m³ |
| Viscosity/40°C / ASTM D 7042 | 68 mm²/s |
| Flash point (Cleveland) / DIN ISO 2592 | > 200 °C |
Divinol T 6 KA ISO 68 is preferably used in tool machines filled with oily cooling lubricants. The product can also be used in tool machines without separate oil circuits.
Divinol T 6 KA ISO 68 is CGLP-alloyed and is therefore also suitable for the bearing- and gear lubrication.
Divinol T 6 KA ISO 68 can be used wherever good lubrication performance as well as good adhesion is demanded. The requirements for the lubrication of machines filled with oil like Cincinnati-Milacron P-47, P-50 and P-53 are fulfilled.
Special additives lower the friction force when starting the carriage. Therefore, friction vibrations caused by stick-slip are prevented, even at low sliding speeds and at the same time high contact pressure.