text.skipToContent text.skipToNavigation

Divinol T 6 KA ISO 68

Art-Nr.: 90050
  • special lubricant for guide- and slide ways

 

Would you like to have further information? Registered customers additionally have access to downloads and datasheets. Please log in or register for our protected customer area.
 
Registration / Login

Product Details

Characteristics

Colour / DIN ISO 2049 lighter 4.5
Density/15°C / DIN EN ISO 12185 890 kg/m³
Viscosity/40°C / ASTM D 7042 68 mm²/s
Flash point (Cleveland) / DIN ISO 2592 > 200 °C

Divinol T 6 KA ISO 68 is preferably used in tool machines filled with oily cooling lubricants. The product can also be used in tool machines without separate oil circuits.

Divinol T 6 KA ISO 68 is CGLP-alloyed and is therefore also suitable for the bearing- and gear lubrication.

Divinol T 6 KA ISO 68 can be used wherever good lubrication performance as well as good adhesion is demanded. The requirements for the lubrication of machines filled with oil like Cincinnati-Milacron P-47, P-50 and P-53 are fulfilled.

Special additives lower the friction force when starting the carriage. Therefore, friction vibrations caused by stick-slip are prevented, even at low sliding speeds and at the same time high contact pressure.

placeholder