Zubora 57 H Ultra
Art-Nr.: 31950- semi-synthetic, water-miscible high-performance cooling lubricant
- on the basis of mineral oil
- free of boron
- free of formaldehyde releasers
- with high content of polar additives
- with EP/AW-additives
- long-term stable
- excellent corrosion protection
- REACH-compliant substances
- resistance of plastics as well as of paints and coatings according to VDI 3035
As the product does not contain any secondary amines, there is no risk of formation of nitrosamines according to the current state of knowledge.
As Zubora 57 H Ultra is inhibited against the formation of nitrosamines no stable nitrosamines can be formed, even if there are any secondary amines and nitrites (e. g. due to external carry-over). Therefore, in case of exceeding the limit value for nitrite according to TRGS 611, it is not necessary to change the emulsion partially or completely.
Would you like to have further information? Registered customers additionally have access to downloads and datasheets. Please log in or register for our protected customer area.
Registration / Login
product.classification.details
| Density/20°C / DIN EN ISO 12185 | 970 kg/m³ |
| Viscosity/20°C / ASTM D 7042 | 367 mm²/s |
| Mineral oil content | 30 % |
| Water hazard class, concentrate | 2 |
| Water hazard class, emulsion | ( |
Due to the high content of polar additives as well as EP-additives Zubora 57 H Ultra can also be used for
difficult machining operations. Due to the innovative formulation a high process security can be guaranteed.
It is suitable for machining of many materials from normal to hardened steel grades, aluminium
or cast iron materials.
Zubora 57 H Ultra is designed for use in hard water and shows special foaming characteristics
with prepared water quality of more than 12° dH.
Recommended hardness of the preparation water:
12 to 24° dH (210 - 430 ppm CaCO3).
medium cutting operations 5 - 7 %
difficult cutting operations (e. g. reaming) 8 - 10 %