Divinol UB 20
Art-Nr.: 23820- non-water-miscible multi-purpose release agent based on mineral oil
- no discoloration of the concrete surface
- very economical in use
- free of waxes and silicones
Would you like to have further information? Registered customers additionally have access to downloads and datasheets. Please log in or register for our protected customer area.
Registration / Login
Product Details
| Colour / Appearance | yellowish |
| Density/15°C / DIN EN ISO 12185 | 860 kg/m³ |
| Viscosity/40°C / ASTM D 7042 | 12 mm²/s |
| Flash point (Cleveland) / DIN ISO 2592 | 165 °C |
| Pour point / ASTM D 7346 | |
| Giscode | BTM 20 |
Divinol UB 20 can be used for all common types of formwork in concrete factories and in the building construction: for less or non-absorbent formwork like phenlo resin formwork and for pretreat rough wooden formwork as well as formwork made of plastic material.
Divinol UB 20 is well used in production of paving stone, bricks and walkway plates.
If used properly, Divinol UB 20 does not allow direct contact of the formwork with the concrete surface. Thus, damages to the surface of the concrete can be prevented and re-working can be avoided.
The life-time of the formwork will be extended and therefore the profitability in general. Moreover, an environmental hazard is excluded.
If used properly, Divinol UB 20 does not influence negatively the subsequent treatment of the concrete surface (plastering, ceramics, wallpaper, paint).
Divinol UB 20 can be applied in the state at time of delivery by spraying, brushing or rolling without any problems.